This role focuses on performing heavy checks and structural modifications on B737 and A330 aircraft in a large maintenance, repair, and overhaul (MRO) hangar and shop campus. You will work on complex structural tasks, including C checks and cabin modification projects, using OEM and engineering documentation to ensure high-quality, precision work on aircraft structures and systems.

Responsibilities

• Perform heavy interior modifications, including efficient removal and reinstallation of cabin monuments without rework.
• Modify and repair aircraft water and waste interface systems in accordance with engineering requirements.
• Precisely locate and install monument hard points on aircraft floor structures using appropriate tools and measurements.
• Repair, replace, and rebuild aircraft component structures to restore structural integrity.
• Repair and modify flight control surfaces and associated components following OEM and engineering drawings.
• Use special installation tools, including blind rivet guns, to install fasteners and structural hardware.
• Interpret and follow OEM and engineering drawings to modify aircraft structures accurately and safely.
• Complete specialized structural tasks such as flap peening and cold working as directed.
• Fabricate repair parts using special shop tooling, including brakes and stretchers, to meet structural repair needs.
• Participate in orientation and safety training during the first week and then transition to the assigned heavy check hangar schedule.
• Use basic and specialized hand tools, including hi-lok pliers and bucking bars, to perform drilling, riveting, and structural assembly tasks.
• Work collaboratively with other technicians and support staff in the hangar and shop environment to complete heavy checks and modification projects on schedule.

• Minimum 4+ years of precision aircraft structures drilling and blind riveting experience in an MRO environment.
• Proven experience in aircraft structural repairs, including sheet metal and structural assembly work.
• Ability to perform structures repairs in a heavy maintenance or modification environment, including drilling, riveting, and installation of structural components.
• Proficiency with blind fastener installation and use of blind rivet guns.
• Ability to read, interpret, and work from OEM and engineering drawings for aircraft structures.
• Experience with heavy checks and structural modifications on transport-category aircraft.
• Ability to use basic hand tools and airframe tools, including wrenches, socket sets, hi-lok pliers, and bucking bars.
• Willingness to work any assigned shift and remain open to first or second shift as required.
• Capability to work safely in a hangar and shop environment and follow all safety training and procedures.

• Preferred experience with heavy interior modifications, including cabin reconfiguration projects.
• Preferred experience with heavy check or modification work on Airbus aircraft and systems.
• Familiarity with Airbus water and waste interface systems (preferred).
• Experience modifying and repairing water and waste interface systems on commercial aircraft.
• Experience with specialized structural tasks such as flap peening and cold working.
• Ability to fabricate repair parts using special shop tooling, such as brakes and stretchers.
• Access to and proficiency with additional tools such as a die grinder, rivet gun, ball peen hammer, and blue dent hammer.
• Ability to bring and use a set of minimum personal hand tools, including wrenches, hi-lok pliers, socket set, and bucking bars.
• Comfort working with structural drilling, riveting, and blind fasteners in a high-precision environment.

You will join a stable maintenance operation offering more than 12 months of steady work in a large, well-equipped MRO facility. The role provides access to per diem for eligible assignments and consistent opportunities for overtime, allowing you to increase your earnings while building deep experience on major commercial aircraft platforms. You will work with experienced professionals, gain exposure to complex heavy checks and modifications, and develop your skills on both Boeing and Airbus aircraft in a structured and safety-focused environment.

Work Environment

Work takes place in large, indoor heavy check hangars and shop areas dedicated to MRO activities. The first week is focused on orientation and safety training, typically from 7:00 a.m. to 4:00 p.m. Monday through Friday, with some sessions concluding by Thursday. After orientation, you will move to an assigned floor shift, which may be either 5:00 a.m. to 3:30 p.m. or 3:30 p.m. to 2:00 a.m., scheduled Monday through Thursday or Tuesday through Friday. The environment supports 10 to 20 hours of overtime typically, depending on project needs. You will work with a range of structural and sheet metal tools, including basic hand tools, hi-lok pliers, bucking bars, and specialized equipment such as blind fastener tools, brakes, stretchers, and other shop tooling. All work is indoors in a structured, safety-conscious setting aligned with MRO standards.

Job Type & Location

This is a Contract position based out of Portland, OR.

The pay range for this position is $40.00 - $50.00/hr.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in Portland,OR.

This position is anticipated to close on Jun 29, 2026.

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com 1-888-AEROTEK.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.